SWITCH CISCO C9200L-24T-4X-A

– 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling

– 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC fiber connectors (single-mode or multimode fiber)

– 10GBASE-SR, LR, LRM (only C9200), ER, ZR, DWDM SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber)

– SFP+ connector

– Cisco StackWise-80 stacking ports: copper-based Cisco StackWise cabling

– Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling

– Management console port: RJ-45-to-DB9 cable for PC connections,USB-C adaptor, USB adaptor

IEEE 802.1w

IEEE 802.1x

IEEE 802.1x-Rev

IEEE 802.3ad

IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1p CoS prioritization

IEEE 802.1Q VLAN

IEEE 802.3 10BASE-T specification

IEEE 802.3u 100BASE-TX specification

IEEE 802.3ab 1000BASE-T specification

IEEE 802.3z 1000BASE-X specification

IEEE 802.3bz 10G BASE-T specification

RMON I and II standards

SNMPv1, v2c, and v3

– UL 60950-1

– CAN/CSA C22.2 No. 60950-1

– EN 60950-1

– AS/NZS 60950.1

– Class I Equipment

– CISPR 22 Class A

– CISPR 32 Class A

– CNS 13438

– EN 300 386

– EN 55022 Class A

– EN 55032 Class A

– EN61000-3-2

– EN61000-3-3

– ICES-003 Class A

– KN 32

– TCVN 7189 Class A

– V-3 Class A

– CISPR 24

– EN 300 386

– EN 55024

– KN 35

– TCVN 7317